Dialogic SS7G2X - Manual (Page 55)

55
Dialogic ® SS7G2x Signaling Server SGW Mode User Manual Issue 4
6.5.13 CNRDC – Configuration Remote Data Centre Change
Synopsis
This command is used to change the configuration of a Remote Data Centre (RDC).
Syntax
CNRDC: RDC =,{[ IPADDR =,][ USER =,][ PASSWORD =,][ LABEL =,]};
Prerequisites
•
The RDC is already initiated and blocked.
•
If specified, the IP address is not already in use.
•
Remote data operation must be allowed by the system.
Attributes
CONFIG
Examples
CNRDC: RDC =1, IPADDR =194.192.184.77, USER =JOHN, PASSWORD =BAZZA23;
6.5.14 CNRDE – Configuration Remote Data Centre End
Synopsis
This command is used to end a Remote Data Centre (RDC).
Syntax
CNRDE: RDC =;
Prerequisites
•
The RDC is already initiated.
•
The RDC is blocked.
•
The RDC is not attached to a continuous record or periodic report.
Attributes
CONFIG
Examples
CNRDE: RDC =1;