7 c7rte, 8 c7rtp, C7rte – ccs ss7 route end – Dialogic SS7G2X User Manual
Page 72: C7rtp – ccs ss7 route print, C7rte, Ccs ss7 route end, C7rtp, Ccs ss7 route print
72
Chapter 6 Command Definitions
6.6.7
C7RTE – CCS SS7 Route End
Synopsis
This command is used to end an SS7 Signaling Route.
Syntax
C7RTE:
Prerequisites
•
All SS7 signaling links must be blocked.
Note: After blocking an SS7 link cannot be unblocked until all the boards processing the SS7 signaling
are blocked and then unblocked.
•
combination has already been initiated.
Attributes
CONFIG
Examples
C7RTE:
=1;
6.6.8
C7RTP – CCS SS7 Route Print
Synopsis
This command shows the attributes of the specified SS7 Route or range of routes within a network context.
If no route or network context is specified, the values for all routes are shown.
Syntax
C7RTP;
C7RTP:
C7RTP:
Prerequisites
None
Attributes
None
Examples
C7RTP;
Output Format
CCITT SS7 Signaling Route Configuration
C7RT NC DPC LS1 LS2 LSH LABEL
1 1 2 1 3 Y LONDON
2 1 3 2 4 N EDINBURGH
3 1 DFLT 5 N DEFAULT
1 2 66 12 13 N BATH
EXECUTED