Dialogic SS7G2X - Manual (Page 99)

99
Dialogic ® SS7G2x Signaling Server SGW Mode User Manual Issue 4
6.11.2 RDCRC – Remote Data Centre Continuous Record Change
Synopsis
This command changes the parameters for a continuous record collection for which collected data is
transferred via Ethernet to a Remote Data Centre (RDC).
The period is the maximum amount of time allowed before the transfer of a block of continuous records must
be performed.
The label is used as the directory name on the RDC that the files are written to.
Syntax
RDCRC: RECORD =,[ PERIOD =,][ MINREC =,][ RDC1 =,][ RDC2 =,][ LABEL =];
Prerequisites
•
The record must already be initiated.
•
If specified, RDC1 must already be initiated.
•
If specified, RDC2 must already be initiated
•
If specified, RDC2 must not equal RDC1 .
Limitations
•
Before transfer to a RDC can take place, the directory (represented by the label) must exist on the
remote site.
•
PERIOD must be in the range 30 seconds to 30 minutes.
Attributes
CONFIG
Examples
RDCRC: RECORD =1, PERIOD =00:05:00, MINREC =100,
RDC1 =1, LABEL =ALARM;