Echelon i.LON 100 e2 Internet Server - Manual (Page 113)

i. LON 100 Internet Server Programmer’s Reference 8-7
<UCPTpasAlarmType>AL_NO_CONDITION</UCPTpasAlarmType>
<UCPTpasAlarmType>AL_NUL</UCPTpasAlarmType>
</PassiveAlarm>
<AlarmDest>
<UCPTindex>0</UCPTindex>
<UCPTdestEnable>NVL_nviWeekday</UCPTdestEnable>
<ActiveDest>
<UCPTindex>0</UCPTindex>
<UCPTpointName>NVL_nvoAlarmFlag1</UCPTpointName>
<UCPTpointValue>77.0 1</UCPTpointValue>
<UCPTminLevel>1</UCPTminLevel>
<UCPTmaxLevel>0</UCPTmaxLevel>
<UCPTnackDelay>0</UCPTnackDelay>
</ActiveDest>
<PassiveDest>
<UCPTindex>1</UCPTindex>
<UCPTpointName>NVL_nvoAlarmFlag1</UCPTpointName>
<UCPTpointValue>MEDIUM</UCPTpointValue>
</PassiveDest>
</AlarmDest>
<AlarmDest>
<UCPTindex>1</UCPTindex>
<UCPTdestEnable>NVL_nviWeekend</UCPTdestEnable>
<ActiveDest>
<UCPTindex>0</UCPTindex>
<UCPTpointName>NVL_nvoAlarmFlag1</UCPTpointName>
<UCPTemailNickName>Joerg</UCPTemailNickName>
<UCPTpointValue>100.0 1</UCPTpointValue>
<UCPTminLevel>2</UCPTminLevel>
<UCPTmaxLevel>0 /UCPTmaxLevel>
<
<UCPTnackDelay>0</UCPTnackDelay>
</ActiveDest>
<PassiveDest>
<UCPTindex>1</UCPTindex>
<UCPTpointName>NVL_nvoAlarmFlag1</UCPTpointName>
<UCPTpointValu
Off Value</UCPTpointValue> e>
<UCPTminLevel>255</UCPTminLevel>
<UCPTmaxLevel>255</UCPTmaxLevel>
</PassiveDest>
</AlarmDest>
</Alarm>
</iLONAlarmNotifier>
</Result>
The function returns an <Alarm> element for each Alarm Notifier referenced in the <Data>
parameter you supplied to the function. The properties included in each element are initially
defined when the Alarm Notifier is created. You can write to them using the
AlarmNotifierSet function. Table 31 describes these properties.
For more information on the AlarmNotifierSet function, see AlarmNotifierSet on page 8-19.
Table 31 AlarmNotifierGet Output Properties
Property Description