Echelon i.LON 100 e2 Internet Server - Manual (Page 205)

13.2.1.3 TypeTranslatorRuleSet
i. LON 100 Internet Server Programmer’s Reference
The following example uses the TypeTranslatorRuleSet function to create a Type Translator
Rule defintion that will convert data points of type SNVT_lev_disc to data points of type
SNVT_switch. The rule takes a single data point as input, and returns a single data point as
output.
</OutDataPoint>
Use the TypeTranslatorRuleSet function to create a new Type Translator Rule, or to
overwrite the configuration of an exisiting Type Translator Rule. Each time you use this
function to create a new Type Translator Rule, an XML file for that rule will be generated in
the /root/config/software/TranslatorRules directory of your i. LON 100. Once the file has been
generated, you can reference the rule when creating a Type Translator, as described in
Chapter 12.
The previous section, TypeTranslatorRuleGet, describes the properties and elements you can
use to define each Type Translator Rule.
NOTE: Type Translator Rules created with the TypeTranslatorRuleSet function are not
supported by the i. LON 100 Configuration Software.
<Data>
<iLONTypeTranslatorRule>
<UCPTindex></UCPTindex>
<UCPTdescription>Converts SNVT_lev_disc to SNVT_occupancy </UCPTdescription>
<InDataPoint>
<UCPTindex>0</UCPTindex>
<UCPTformatDescription>SNVT_lev_disc</UCPTformatDescription>
</InDataPoint>
<OutDataPoint>
<UCPTindex>0</UCPTindex>
<UCPTformatDescription>SNVT_occupancy</UCPTformatDescription>
<Data>
Parameter
<TypeTranslatorRule>
<UCPTtranslatorRule>SNVT_lev_disc_TO_SNVT_occupancy</UCPTtranslatorRule>
<Case>
<UCPTindex>0</UCPTindex>
<UCPTfieldNameIn></UCPTfieldNameIn>
<UCPTindexIn>0</UCPTindexIn>
<UCPTcompFunction>FN_NUL</UCPTcompFunction>
<UCPTcompValue>0</UCPTcompValue>
<Rule>
<UCPTindex>0</UCPTindex>
<UCPTindexIn>0</UCPTindexIn>
<UCPTfieldNameIn></UCPTfieldNameIn>
<UCPTindexOut>0</UCPTindexOut>
<UCPTfieldNameOut></UCPTfieldNameOut>
<UCPTcompFunction>FN_EQ</UCPTcompFunction>
<UCPTcompValue>ST_NUL</UCPTcompValue>
<UCPTmultiplier>0</UCPTmultiplier>
<UCPTconstant>OC_NUL</UCPTconstant>
</Rule>
<UCPTindex>1</UCPTindex>
<UCPTindexIn>0</UCPTindexIn>
<UCPTfieldNameIn></UCPTfieldNameIn>
<UCPTindexOut>0</UCPTindexOut>
<UCPTfieldNameOut></UCPTfieldNameOut>
<UCPTcompFuncti FN_EQ</UCPTcompFunction> on>
<UCPTcompValue>ST_OFF</UCPTcompValue>
<Rule>
13-12