Echelon i.LON 100 e2 Internet Server - Manual (Page 152)

i. LON 100 Internet Server Programmer’s Reference 9-15
</CompareDataPoint>
<OutputDataPoint>
<UCPTfieldName>value</UCPTfieldName>
<UCPTpollRate>0</UCPTpollRate>
<UCPTpointName>NVL_nvoClsValue_1</UCPTpointName>
<UCPTfieldName>value</UCPTfieldName>
</OutputDataPoint>
</AnalogFB>
</iLONAnalogFB>
</Data>
<Result>
Parameter <Result>
<iLONAnalogFB>
<AnalogFB>
<UCPTindex>1</UCPTindex>
</AnalogFB>
</iLONAnalogFB>
</Result>
9.2.1.4 AnalogFBDelete
You can use the AnalogFBDelete function to delete an Analog Function Block. You must
reference the Analog Function Block to be deleted by its index number in the <Data>
parameter you supply to the function, as in the example below.
<Data> Parameter <Data>
<iLON100AnalogFB>
<AnalogFB>
<UCPTindex>1</UCPTindex>
</AnalogFB>
</iLON100AnalogFB>
</Data>
<Result> Parameter <Result>
<iLON100AnalogFB>
<AnalogFB>
<UCPTindex>1</UCPTindex>
</AnalogFB>
</iLON100AnalogFB>
</Result>