EXFO FTB-8500 Series for FTB-500 - Manual (Page 357)

EtherSAM Tabs
Ethernet and Fibre Channel Application 343
Overview (Results)

Max Round-Trip Latency (ms) indicates the maximum measured
round trip latency (delay). For FTB-8120NGE and FTB-8130NGE in Dual
Test Set, only available when round-trip latency measurement mode is
selected.

Max Latency (ms) indicates the maximum measured one way latency
(delay). Only available with FTB-8120NGE and FTB-8130NGE in Dual
Test Set one-way latency measurement mode. Not Measurable is
displayed when the maximum latency is higher than 500 ms.

Verdict indicates that the performance metrics (Jitter, Latency, and
Frame Loss) comply (pass
) or not (fail ) to the SLA
configuration. The verdict is based on the results from all the ramp
steps excluding the Traffic Policing step.

Max RX Rate indicates the measured maximum utilization RX rate
(throughput).

Verdict indicates the maximum throughput complies (pass ) or not
(fail ) to the maximum allowed value based on either the configured
CIR+EIR or CIR when CIR+EIR is not enabled.
Note: Each metric with a fail verdict will be displayed with a red background.