EXFO FTB-8500 Series for FTB-500 - Manual (Page 393)

System Tabs
Ethernet and Fibre Channel Application 379
Software Options
Available Options
The available software options are listed with the Status indicating what
software options are installed (enabled) or not (disabled) on the module.
For FTB-8510B
Category Name Description
Interface SK-10M-E-AP The 10Mbps Ethernet interface is enabled on both ports.
SK-100M-E-AP The 100Mbps Ethernet interface is enabled on both
ports.
SK-1000M-E The electrical 1000Mbps Ethernet interface is enabled
on port #1.
SK-100M-O-AP The optical 100Mbps Ethernet interface is enabled on
both ports.
SK-1000M-O The optical 1000Mbps Ethernet interface is enabled on
port #1.
SK-2ND-PORT All enabled interfaces on port #1 are also enabled on
port #2.
SK-ETH-THRU Ethernet Through Mode.
SK-FC-1X Fibre Channel 1x (Optical) Interface (100MBps)
SK-FC-2X Fibre Channel 2x (Optical) Interface (200MBps)