FeiYu Tech FY-Panda2 Autopilot - Manual (Page 16)

Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn [email protected]
15
GPS module installation
 GPS module including a flat-GPS passive antenna. This is a sensitive antenna for
GPS signals, while false signals reflected from the ground is effectively filtered
out. Install the GPS unit horizontally. Keep metal objects and other conductive
materials such as carbon fibre away from the GPS unit. Additionally no
transmitting antenna should be around the GPS antenna. The communication link
antenna (Data Radio) or your video transmitter should be kept as far away from
the GPS unit as possible.
Power management module installation
 The power management module is used to connect the power battery and ESC,
which integrates a current sensor, can measure the power current and voltage, the
internal integrated DC-DC module will output a stable voltage which about 5.3V to
power on Panda2 . But the power management module can not power on the servos,
The servos still need through the ESC from S3 port or external power source
from P2
port to power on.