FeiYu Tech FY-Panda2 Autopilot - Manual (Page 34)

Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn [email protected]
33
Auto take-off setting and debugging
Attack angle: Use this to adjust the Auto take-off pitch setting(default is 25 deg).
Take-off Spd: Ground speed setting during take-off(We suggest you set to 0).
Take Off Throttle：We suggest you set to 90.
Automatic take-off is not suitable for all model aircraft, it's more suitable for
hand or catapult take-off aircraft. We take throwing take off aircraft for example,
after set the automatic take-off parameter, please prepare for throwing take off.
Click on
. Wait the motor reach maximize speed, then push the aircraft
into the air. Observe the aircraft auto take off or not, the aircraft auto climb to 50m
and into RTL mode. The aircraft will continue climb to 100m and circling around
Home point waiting for your next instructions. During the auto take-off procedure
except the throttle you still can through your RC to manual assistant auto take-off.