FeiYu Tech FY-Panda2 Autopilot - Manual (Page 29)

Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn [email protected]
28
6. To Check the servo control surface automatic movement and setting install
direction, also the airspeed and altimeter, First, you should switch"SW2" to "NULL"
mode, then switch "SW1" to the " Stabilized Mode ".
Taking the Aircraft roll tilt and pitch tilt, and checking whether the GCS attitude
table shows the attitude is correct or not if not, you need to re-set the" Inst Setting " .
Airspeed indicator and altimeter display value should be 0 or near 0 .Taking the
Aircraft roll tilt, pitch, tilt, and head deflection, and check whether the servo control
surface automatic movement is correct or not, the inspection method, please refer to the
description of" Servo Control Reverse setting".
5. Switch ―SW2‖ to ―NULL‖ and switch ―SW1‖to ―Manual mode‖. Use your RC sticks to
control the aircraft servos surface to see the movement is right or not.