FeiYu Tech FY-Panda2 Autopilot - Manual (Page 30)

Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn [email protected]
29
9. Setting a simple routes, for example, you can set a rhombus routes ,its length is about 500
meters , the height of Waypoint is 200 meters.
7. Data checking and vibration testing:
First check every flight control data is right or not.
Pushing the throttle ,and check whether the value of the " AHRS ERROR " is
increase at each throttle part. The normal situation is at the value of 0, if the values
continue to increase, it shows that you need to do more damping installation for Panda2
module. If you do not do well job for damping installation, the aircraft can not take off.
8. Putting the aircraft into the field, and waiting for GPS positioning success. The GPS red
LED will continuous flash after GPS positioning success. At the same time you can see the
icon of the aircraft on the GCS software.
10. Set the Home point: After power on,Panda2 will take the GPS first location point as
Home Point. But you also can through button to set the new Home Point.