FeiYu Tech FY-Panda2 Autopilot - Manual (Page 28)

Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn [email protected]
27
First flight test
1.Assume that flight control system and ground control system connection is complete and
right.
2.Turn on your RC, power on your aircraft and ground control
station.
3.Open our GCS software ， choose the right COM ， baud rate 19200 ， Click on
,input file name "test", click on ―Save‖, now you should be able to see the flight
data like attitude, altitude ,voltage ,etc. on our GCS software.
4.Please check your RC 3-position switch setting is right and effective or not. First
check ―SW2‖,Switch SW2 and make sure you can see the flight mode ―Path NAV‖,
―RTH‖ change on our GCS software. If the SW2 setting is right, please switch ―SW2‖ to
―NULL‖. Now check the ―SW1‖. Switch SW1 and make sure you can see the flight
mode ―RC‖, ―RPV‖, ―Aerobatics‖ change on our GCS software.