FeiYu Tech FY-Panda2 Autopilot - Manual (Page 17)

Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn [email protected]
16
Data Radio module installation
 The Data Radio module should placed away from the GPS module , Panda2
module and the servos as far as possible, in order to avoid the disruption of these
devices. The Data Radio antenna should be vertically up or down when you install
it .
 Certain frequency bands from the Data Radio can interfere with servos due to
electromagnetic emission. To resolve this issue either avoid placing the Data Radio
transmitter close to sensitive components or use a magnetic core (as shown below)
to reduce the interference.
Airspeed Sensor module installation
 The airspeed sensor need to pull ahead the front of the pneumatic opening and in the
line with the direction of flight. You can install the Airspeed sensor to the wing or in
the front of the nose, do not block the front of the air inlet , we can use the glue to
fix the airspeed sensor.
Note: Make sure that after installation, the fuselage in flight
airflow can not interfere with air intakes.