FeiYu Tech FY-Panda2 Autopilot - Manual (Page 36)

Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn [email protected]
35
Auto landing setting and debugging
In order to realize the auto landing function you need to set 2 point to make
sure the lading air route. One is landing point, please click on to set
point A .Another is Home point, please click on to set point
B ,The auto landing air route is A-B, and B is the aircraft landing point. Point
C is the automatically generated downward spiral point during the auto landing
procedure. Automatic landing will consists of the following three stages.
1.Click on to start auto landing, first the aircraft will fly to circling
point C.
2.
When it reaches point C, it's will auto circling around point C, and gradually
decline to 50 meters.
3.
The aircraft will continuous to decline the altitude to 25 meters and at the right
time to cut into A-B route.
4.
Enter the AB air line and control the altitude as far as possible to make the
aircraft landed at point B, and at the right time to close the throttle, end whole
Auto Landing.