FeiYu Tech FY-Panda2 Autopilot - Manual (Page 31)

Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn [email protected]
30
11.Gyro Initialization: Please click on the ―Gyro Init‖ button to do the gyro reset.
Attention: During the gyro reset, please keep the panda2 static and you can not to do the
gyro rest during the flight. It‘s better to do the gyro reset before each flight.
12. Initialization of the airspeed : Put the aircraft keep static, you can use your hand to cover
the port of the airspeed , and do not let the wind interfere with the airspeed sensor, then click
the button .After that please check whether the airspeed showing on GCS is in the
vicinity of 0-3.Due to the sensor error, there are some tiny airspeed value on the ground is
normal.
13. Take off: Now you can take off at ―Stabilized Mode‖ or ―Manual Mode‖.