Labconco Purifie Horizontal Clean Benches 36125 Series - Manual (Page 21)

17
Product Service 1-800-522-7658
Chapter 3: Getting Started
Width
Clean
Bench
Model #
Manual
Lift Stand #
Electric
(115V) Lift
Stand #
Electric
(230V) Lift
Stand #
3' 36000 3780400 3780300 3780303
4' 36125 3780401 3780301 3780304
6' 36100 3780402 3780302 3780305
When installing the hydraulic lift base
stands, ensure that the hydraulic lines
and the electrical cord are clear of any
obstructions BEFORE installing the
Clean Bench on the stand or operating
the lift system.
For further information regarding Telescoping Base
Stands or other accessories, please contact Labconco’s
Customer Service Department at 1-800-821-5525 or
816-333-8811 weekdays, between the hours of 7:00
a.m. and 6:00 p.m. CST.
1. Before positioning the Telescoping Base Stand in
its final location, decide the final height of the
stand. The height of the work surface can be raised
in one-inch increments from 28.75 to 34.75 inches.
2. Select the height of the Telescoping Base Stand and
slide four (4) leg extensions into base stand corner
posts and attach with 2.25" long bolt, flatwasher,
lockwasher and nut. Ensure that the same height
hole is selected for each leg. Tighten the leg bolts
securely. See Figure 3-2.
!
Table 3-2