Labconco Purifie Horizontal Clean Benches 36125 Series - Manual (Page 53)

49
Product Service 1-800-522-7658
Chapter 6: Maintaining Your Clean Bench
HEPA Filter Replacement:
The HEPA filter should only be
serviced by a qualified certification
technician. Following replacement of
the HEPA filter, a qualified
certification technician MUST
recertify the clean bench.
1. Unplug the clean bench.
2. Remove the diffuser as described above.
3. Loosen and remove the filter clamps.
THE TOP AND BOTTOM FILTER
CLAMPS ARE DIFFERENT
ASSEMBLIES. THE BOTTOM
CLAMP ASSEMBLIES ARE DARK IN
COLOR, WHILE THE UPPER
CLAMPS ARE LIGHTER.
4. Gently pull out the Secondary HEPA filter gasket
on the top and both sides of the HEPA filter as
shown in Figure 6-4. Save the gasket for
)
Figure 6-3