Labconco Protecto Stainless Steel Perchloric Acid Laboratory Fume Hoods 9682100 - Manual (Page 50)

46
Product Service 1-800-522-7658
Chapter 7: Modifying Your Protector Perchloric Acid Hood
Sash Stop Kit – Field
Installation
The sash stop P/N 9724500 restricts how far a vertical-
rising sash may be opened. This small plastic device
may be easily field installed on the fixture corner post
of any fume hood. The metal bracket is simply mounted
to the sash handle.
Figure 7-7
Installing an Electrical
Duplex Outlet
Your Protector Perchloric Acid Fume Hood can be
ordered with duplex outlets, however, if you ordered a
model without an electrical duplex outlet you can have
one installed in the field by a qualified electrician.
Contact Labconco Customer Service for ordering
information. (Not acceptable on explosion-proof
hoods).
Figure 7-8