Labconco Protecto Stainless Steel Perchloric Acid Laboratory Fume Hoods 9682100 - Manual (Page 8)

4
Product Service 1-800-522-7658
Chapter 1: Introduction
• A number icon precedes information that is specific
to a particular model of laboratory fume hood. The
4' icon indicates the text is specific to the 4-foot
wide model. The 5' icon indicates the text is
specific to the 5-foot model, etc.
• The S icon indicates the text is specific to the
standard model.
• The A icon indicates the text is specific to the A-
Style Combination Sash Model.
Your Next Step
If your Fume Hood needs to be installed, proceed to
Chapter 2: Prerequisites to ensure your installation site
meets all of the requirements. Then, go to Chapter 3:
Getting Started for instructions on how to install your
laboratory fume hood and make all of the necessary
connections.
If you would like to review how laboratory fume hoods
operate, go to Chapter 4: Performance Features and
Safety Precautions.
For information on the operational characteristics of
your laboratory fume hood, go to Chapter 5: Using
Your Protector Perchloric Acid Hood.
If your laboratory fume hood is installed and you need
to perform routine maintenance on the cabinet, proceed
to Chapter 6: Maintaining Your Protector Perchloric
Acid Hood.
For information on making modifications to the
configuration of your fume hood, go to Chapter 7:
Modifying Your Laboratory Fume Hood.
Refer to Chapter 8: Troubleshooting if you are
experiencing problems with your fume hood.
4' 5' 6'
S
A
8'