Labconco Protecto Stainless Steel Perchloric Acid Laboratory Fume Hoods 9682100 - Manual (Page 6)

2
Product Service 1-800-522-7658
Chapter 1: Introduction
About This Manual
This manual is designed to help you learn how to
install, use, and maintain your laboratory fume hood.
Instructions for installing optional equipment on your
hood are also included.
Chapter 1: Introduction provides a brief overview of
the laboratory fume hood, explains the organization of
the manual, and defines the typographical conventions
used in the manual.
Chapter 2: Prerequisites explains what you need to do
to prepare your site before you install your laboratory
fume hood. Electrical and service requirements are
discussed.
Chapter 3: Getting Started contains the information
you need to properly unpack, inspect, install, and
certify your laboratory fume hood.
Chapter 4: Performance Features and Safety
Precautions explains how the Protector Perchloric Acid
Hood operates and the appropriate precautions you
should take when using the fume hood.
Chapter 5: Using Your Protector Perchloric Acid Hood
discusses the basic operation of your fume hood.
Chapter 6: Maintaining Your Protector Perchloric Acid
Hood explains how to perform routine maintenance on
your fume hood.
Chapter 7: Modifying Your Protector Perchloric Acid
Hood explains how to modify the fume hood or add
accessories.
Chapter 8: Troubleshooting contains a table of
problems you may encounter while using your
laboratory fume hood including the probable causes of
the problems and suggested corrective actions.