Laerdal AED Trainer 2 - Manual (Page 4)

4
This function is for future use.
Select one of the 10 standard
scenarios.
Select one of the 3 custom
scenarios.
Show the selected scenario in the operator display for
2 seconds.
Pause / Resume scenario and AED-Trainer activity.
Pause ( ) will freeze all activity in the trainer. Pause is
indicted by flashing symbol shown. Resume ( )
resumes the activity from the point at which it was
paused.
Simulate motion artifact. Analysis will be interrupted
and a voice prompt asking to stop all motion will be
issued.
Simulate loose electrodes connection
Simulate good electrodes connection. This
function will also override the detection of
physical pad placement.
Simulate a shockable rhythm. This function will over-
ride the running scenario.
Simulate a non-shockable rhythm. This function will
override the running scenario.
Light electrode pad position LEDs on manikin chest.
Simulate low battery. Press once for Low Battery. Press
again for Replace battery.
Simulate error condition. Unit will stop operation and
give "chirping" sound every 10 seconds. "Er" is continu-
ously displayed in the operator display. This state repre-
sents a red X in the status display on the FR2.
Adjust speaker volume.
R Re em mo otte e C Co on nttrro oll
((o op pttiio on naall))