Laerdal AED Trainer 2 - Manual (Page 6)

Symbol Meaning
SSE ELLE EC CT TIIN NG G T TR RA AIIN NIIN NG G SSC CE EN NA AR RIIO OSS
You can select a training scenario by using either the optional remote control or via the Trainer's set-up mode. To activate
the setup mode, make sure the electrode pads are not connected, then remove and reinsert the battery. Alternatively, press
and hold down the two blue Up/Down buttons while simultaneously pressing the green On/Off button. When the Trainer
is in set-up mode, the operator display shows the currently selected scenario. To change the scenario selection, use the
Up/Down buttons to select the desired scenario, then press the On/Off button to exit the setup mode. The last scenario
selection is stored in the unit even if the battery is taken out.
(Simulated) shockable rhythm detected by Trainer
(Simulated) non-shockable rhythm detected by Trainer
(Simulated) shockable rhythm detected by Trainer that fulfils CPR first criteria. Trainer recommends CPR
(Simulated) pads problem detected by Trainer
(Simulated) motion problem detected by Trainer
Scenario Scenario description Details
1
2
3
4
5
One shock for conversion
Four shocks for conversion
Troubleshooting pads, one shock needed
for conversion
Re-fibrillation after conversion
Non-shockable rhythm throughout
• Shockable rhythm
• One shock for conversion
• Non-shockable rhythm
• Shockable rhythm
• Four shocks needed for conversion
• Non-shockable rhythm
• Shockable rhythm
• One shock for conversion
• Non-shockable rhythm
• Shockable rhythm
• One shock for conversion
• Non-shockable rhythm
• Poor pad contact, check pads
• Shockable Rhythm
• One shock for conversion
• Non-shockable rhythm
6