Laerdal SimMan Essential - Manual (Page 18)

MANIKIN SETUP
18
The Power Panel
The power panel is situated on the right side of the manikin, under
a loose skin flap. Lift the skin flap and pull out the protective cover.
To ensure easy access, use the zippered clothing provided with the
SimMan Essential and SimMan Essential Bleeding manikin.
DC Input 9-24V X, XA
1
2
3
4
5
6
poWer panel overvieW
1 Power ON / OFF button
2 Power status indicator
3 Battery status indicator
4 Charging status indicator
5 LAN network cable connector
6 External power supply connector
poWer panel leDS DeScription
leD color power Status Battery Status charge Status
Red Power Status* 0% - 20% Not charging**
Yellow Start up 20% - 70% Charging
Green Running 70% - 100% Charge almost complete***
No light Off Off No charge***
* Blinking light
** One or both batteries missing, overheated, damaged or otherwise not able to charge
*** Not recommended to charge the batteries too long
**** No power input, batteries are charged.
Power Save is activated when ever manikin is paused.
charging the BatterieS inSiDe the Manikin
1 Connect the manikin to the external power supply with
a power cord and plug that meets local specifications.
2 Plug the power supply into a wall outlet.
SimMan Ess DFU_RevF.indd 18 18.07.12 13:54