Replacing lung bladders – Laerdal SimMan Essential User Manual
Page 75
![background image](/manuals/738884/75/background.png)
MAINTENANCE
75
cheSt riSe Bladder tuBe deScriPtionS
name/label
tube color
connector description
Pneum L
Silicon
Barb connector
Pneum R
Silicon
Barb connector
Chest L
Silicon
Barb connector
Chest R
Silicon
Barb connector
Replacing Lung Bladders
If leaking occurs, the chest rise bladders (in the chest cavity) should be replaced.
1 Open the torso skin and put the stomach foam to the side.
2 Open the hinged chest plate upwards, to access the lungs.
3 Remove the chest compression spring for easier access
to the lungs.
4 Unhook the yellow Lung Compliance bands from each
side of the lung assembly.
5 Open the hinged lung plate. Pull the old lung out from
its socket.
6 Insert the new lung reversing this procedure.
Note: Ensure that the compliance bands intersect between the two folds of the lung.
SimMan Ess DFU_RevF.indd 75
18.07.12 14:20