Laerdal SimMan Essential - Manual (Page 46)

SETUP FOR SIMULATION
46
Cleaning the system
1 After each session and before storage, clean the IV Arm system.
4 Connect an air filled syringe to the fill port. Inject air until
water is no longer coming out of the drain tube.
2 Make sure the collector bag is connected to the drain
tube.
3 Connect a syringe filled with de-ionized or distilled water
to the fill port and slowly inject until clear fluid is coming
out of the drain tube.
SimMan Ess DFU_RevF.indd 46 18.07.12 14:04