Laerdal SimMan Essential - Manual (Page 41)

41
SETUP FOR SIMULATION
Mixing of Blood and fluid
To mix simulated blood: Fill the Blood Fill bottle approx
3 /
4
full of de-ionized water. Add 5-10 drops of Laerdal Blood colored concentrate,
mix and tighten the cap.
fill Manikin Blood ReseRvoiR
Note: Make sure the manikin power is on. Roll the right leg skin down to expose the fill panel.
1 Connect blood fill unit tubes to the blood and air connectors in the right leg panel.
2 Push the fill button on the panel. The button will light up and blood will flow into the manikin.
3 When the flow stops, disconnect the fill unit.
4 Push the fill button on the panel. The light will go out.
Note: Disconnect tubes from the manikin before pushing the fill button. Pushing the button before disconnecting the tubes will initiate
draining of the tank.
eMpty inteRnal Blood ReseRvoiR
1 Connect an empty blood fill unit to blood and air connectors in the right leg panel.
2 Blood from the internal reservoir will drain into the bottle.
3 When the flow stops, disconnect the blood and air connectors.
Run Manikin with exteRnal Blood
1 drain the internal reservoir. Follow instructions for “Empty Internal Blood Reservoir”.
2 After draining the internal reservoir, fill the blood fill unit and connect to the manikin.
3 Push the fill button on the panel. The button will light and blood will flow into the manikin.
4 Charge the system for 60 seconds before starting bleeding simulation.
Warning: Connecting a full blood fill unit to a manikin with a full internal reservoir will result in system overflow. Blood will drain out of the right leg.
Repeatedly overflowing the system may damage the product.
Air Out Blood
Inlet Activate
Filling
Fluid
Inlet Air Out Blood
Inlet Activate
Filling
SimMan
Blood Fill Uni t
SimMan
Blood Fill Unit
Fluid
Inlet Air Out Blood Inlet Activate Filling
Fluid
Inlet Air Out Blood Inlet Activate Filling
SimMan
Blood Fill Uni t
SimMan
Blood Fill Unit
Air Out Blood
Inlet Activate
Filling
Fluid
Inlet Air Out Blood
Inlet Activate
Filling
SimMan
Blood Fill Uni t
SimMan
Blood Fill Unit
Air Out Blood
Inlet Activate Filling
Fluid
Inlet Air Out Blood
Inlet Activate
Filling
SimMan
Blood Fill Uni t
SimMan
Blood Fill Unit
Air Out Blood Inlet Activate Filling
Fluid
Inlet Air Out Blood Inlet Activate Filling
SimMan
Blood Fill Uni t
SimMan
Blood Fill Unit
SimMan Ess DFU_RevF.indd 41 18.07.12 14:02