Laerdal SimMan Essential - Manual (Page 55)

55
SETUP FOR SIMULATION
Connecting the Blood Pressure Cuff
The manikin is delivered with a specially adjusted blood pressure cuff. Connect the tube to the white BP connector at the side of the
manikin before use.
CalibRating the blOOd pReSSURe CUFF
Connecting the SpO
2
Probe
The SpO
2
probe can be purchased separately.
The SimMan Essential SpO
2
probe is made up of a light diode and
light sensor. When the beam between the diode and sensor is broken,
the Patient Monitor Application registers that the SpO
2
probe is
connected.
1 Connect the probe’s USB plug to the Patient Monitor PC.
2 The probe can be placed on any suitable area on the manikin,
Ensure that the probe is always firmly fixed in position.
SimMan Ess DFU_RevF.indd 55 20.07.12 09:21