Luxul XMS-1024P - Manual (Page 12)

12
XMS-1024P
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XMS-1024P Vers: 081314
2.3 Description
2.3.1 Front Panel
Figure 2-1 Front Panel
The following parts are located on the front panel of the Switch:
24 10/100/1000Mbps Ports: Designed to connect client devices with a bandwidth of
up to 1000Mbps.
4 SFP Ports: Designed to allow the use of an SFP module for fi ber interlinking.
NOTE: When using the SFP Port with a 100Mbps module or a Gigabit
module, you need to confi gure its corresponding Speed and Duplex
mode in Switching>>Port Settings>>Port Confi g page. For 100Mbps
module, please select 100MFD while selecting 1000MFD for Gigabit
modules. By default, the Speed and Duplex mode of any installed
SFP module is 1000MFD.
1 Console Port: Designed to allow connection to the serial Port of a computer or
terminal for monitoring and confi guring the Switch.
24 Port LEDs
The XMS-1024P has a LED mode button which is for Switching the LED status type.
When the Speed LED is lit, the Port LED indicates link/link activity. When the PoE LED
is lit, the Port LED indicates the power supply status. By default the Speed option is on.
Pressing the Mode button will toggle between Speed and PoE. When selected, the PoE
display will remain active for 60 seconds and then default back to Speed display.
When the Speed display is active, the Port LED will indicate the Link/Link Activity
status of the Port.