Luxul XMS-1024P - Manual (Page 128)

128
XMS-1024P
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XMS-1024P Vers: 081314
Step Operation Description
3 Configure parameters for
Multicast VLAN Enable and configure a Multicast VLAN on the
Multicast>>IGMP Snooping>>Multicast VLAN page. It
is recommended to keep the default time parameters.
4 Look over the configuration If it is successfully configured, the VLAN ID of
the Multicast VLAN will be displayed in the IGMP
Snooping Status table on the
Multicast>>IGMP
Snooping>>Snooping Config page.
Application Example for Multicast VLAN:
Network Requirements
A Multicast Server sends Multicast streams via the router, and the streams are transmit-
ted to user A and user B through the Switch.
NOTE: Most Multicast Servers can also be connected directly to the
Switch, please check the compatibility with your Multicast
Server administrator.
Router: A WAN or LAN Port can be connected to the Multicast Server; its LAN Port is
connected to the Switch. The Multicast packets are transmitted in VLAN3.
Switch: Port 3 is connected to the router and the packets are transmitted in VLAN3; Port
4 is connected to user A and the packets are transmitted in VLAN4; Port 5 is connected
to user B and the packets are transmitted in VLAN5.
User A: Connected to Port 4 of the Switch.
User B: Connected to Port 5 of the Switch.
Configure a Multicast VLAN, and user A and B receive Multicast streams through the
Multicast VLAN.