Luxul XMS-1024P - Manual (Page 173)

173
User Guide
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
Create MAC ACL RULE
MASK: Enter MAC Address Mask. If it is set to 1, the Switch must Match the
Address Exactly.
VLAN ID: Enter the VLAN ID contained in the Rule.
Ether Type: Enter Ether Type contained in the Rule.
User Priority: Select the User Priority contained in the Rule for the Matched packets.
Time-Range: Select the Time-Range for the Rule to take effect.
CAUTION: MAC ACL Rule settings will be restored to defaults if the
Switch is restarted and you have not selected Save Confi g
from the main menu and saved your running confi guration to
non-volatile memory.
11.2.4 Standard-IP ACL Rule
Standard-IP ACL Rules analyze and process Data packets based on a series of Matching
conditions. They can analyze the Source IP Address and Destination IP Address carried
in the packets.
Choose the menu ACL>>ACL Confi g>>Standard-IP ACL Rule to load the following page.
Figure11-7 Create Standard-IP Rule