Luxul XMS-1024P - Manual (Page 40)

40
XMS-1024P
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XMS-1024P Vers: 081314
CAUTION: Port Confi g settings will be restored to defaults if the Switch
is restarted and you have not selected Save Confi g from the
main menu and saved your running confi guration to non-
volatile memory.
CAUTION: After the Key File is uploaded the default key of the same type
will be replaced. A failed or corrupt upload will result in SSH
access to default to Password Authentication.
NOTE: The parameters of the Ports in a LAG Group should be set the same
for optimal operation.
5.1.2 Port Mirror
Port Mirror can be used to forward copies of packets from one or multiple Ports
(Mirrored Port or the source Port(s)) to a specifi ed Port (Mirroring or destination Port).
The mirroring Port is connected to a Data diagnosis device, which is used to analyze the
mirrored packets for monitoring and troubleshooting the Network.
Choose the menu Switching>>Port Settings>>Port Mirror to load the following page.
Figure 5-2 Mirroring Port