User guide – Luxul XMS-1024P User Manual
Page 175
Advertising
175
User Guide
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
Choose the menu
ACL>>ACL Confi g>>Extended-IP ACL Rule to load the following page.
Figure11-8 Extended-IP ACL Rule
The following entries are displayed on this screen:
Create Extend-IP ACL
ACL ID:
Select the desired Extended-IP ACL.
Rule ID:
Enter the Rule ID.
Operation:
Select the operation the Switch will use to process packets.
Permit: Forward Packets.
Deny: Discard Packets.
S-IP:
Enter the Source IP Address to be contained in the Rule.
D-IP:
Enter the Destination IP Address to be contained in the Rule.
Mask:
Enter IP Address Mask. If it is set to 1 the Switch must Match the
Address Exactly.
Advertising