User guide – Luxul XMS-1024P User Manual
Page 23
23
User Guide
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
Figure 4-7 System IP
The following entries are displayed on this screen:
IP Confi g
MAC Address: Displays MAC Address or Hardware Address of the Switch.
IP Address
Mode:
Allows you to select the desired mode for setting the IP Address of the Switch.
Static IP: When this option is selected you set the IP Address, Subnet Mask
and Default Gateway manually.
DHCP: When this option is selected the Switch will obtain all IP Address
settings from the DHCP Server in your Network.
BOOTP: When this option is selected the Switch will obtain all IP Address
settings from the BOOTP Server in your Network.
Management
VLAN:
Enter the ID of Management VLAN this will be the only VLAN through which
you can access the Management page of the Switch. By default VLAN1 is the
Management VLAN and you can access the Switch via any Port on the Switch.
However, if another VLAN is created and set to be the Management VLAN, you
may have to reconnect the Management station to a Port that is a member of
the Management VLAN.
IP Address:
The IP Address of the Switch. The default IP is 192.168.0.4, if you have selected
the Static IP option you will be able to modify this address as desired. If DHCP
or BOOTP is selected they will confi gure the IP Address.
Subnet Mask:
The Subnet Mask of the Switch. The default Mask is 255.255.255.0, if you have
selected the Static IP option you will be able to modify this address as desired.
If DHCP or BOOTP is selected they will confi gure the Subnet Mask.
Default
Gateway:
The Default Gateway of the Switch. The default Gateway is blank, if you have
selected the Static IP option you will be able to modify this address as desired.
If DHCP or BOOTP is selected they will confi gure the Default Gateway.