User guide – Luxul XMS-1024P User Manual
Page 219
219
User Guide
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
The following entries are displayed on this screen:
RADIUS Sever Config
Primary IP:
Enter the IP Address of the Primary Authentication Server.
Secondary IP:
Enter the IP Address of the Secondary Authentication Server.
Authentication Port:
Set the UDP Port for the Authentication Server(s). Default Port 1812
Authentication KEY:
Set the shared Password for the Switch and the Authentication Server(s)
used when exchanging messages.
Accounting Config
Accounting:
Enable/Disable the Accounting feature.
Primary IP:
Enter the IP Address of the Primary Accounting Server.
Secondary IP:
Enter the IP Address of the Secondary Accounting Server.
Accounting Port:
Set the UDP Port for the Accounting Server(s). Default Port 1813
Accounting Key:
Set the shared Password for the Switch and the Accounting Server(s)
used when exchanging messages.
CAUTION: RADIUS Server settings will be restored to defaults if the
Switch is restarted and you have not selected Save Config
from the main menu and saved your running configuration to
non-volatile memory.
NOTE: The 802.1X/RADIUS function takes effect only when it is enabled
globally on the Switch and enabled on the Port(s).
NOTE: The 802.1X/RADIUS function cannot be enabled for LAG Group
members. Also Ports with the 802.1X/RADIUS function enabled
cannot be added to a LAG Group.
NOTE: The 802.1X/RADIUS function should not be enabled for Port(s)
connected to the Authentication Server. Authentication
parameters of the Switch and the Authentication Server should
be identical.