Luxul XMS-1024P - Manual (Page 233)

233
User Guide
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
Choose the menu SNMP>>SNMP Notifi cation>>SNMP Notifi cation Confi g to load the
following page.
Figure 13-8 SNMP Notifi cation Confi g
The following entries are displayed on this screen:
Create Notifi cation
IP Address: Enter the IP Address of the Management Station.
UDP Port: Enter the UDP Port used to send SNMP Notifi cations. Default is 162
User: Enter the Username for the Management Station.
Security Model: Select the Security Model of the Management Station.
Security Level: Select the Security Level for the User (SNMP v3 only).
„
noAuthNoPriv: No Authentication and No Privacy Security Level is
used.
„ authNoPriv: Only the Authentication Security Level is used.
„ authPriv: Both the Authentication and Privacy Security Levels are used.
Type: Select the type for the SNMP Notifi cation.
„
Trap: Indicates Trap messages are sent.
„
Inform: Indicates Inform messages are sent. Inform messages have
higher security than Trap type messages.