User guide – Luxul XMS-1024P User Manual
Page 275
275
User Guide
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
16.2.1 Log Table
The Switch supports log output into two formats: the log buffer and a log fi le. The
information in log buffer will be lost after the Switch is rebooted or powered. The
information in log fi le will be kept even if the Switch is rebooted or powered off. The
Log Table displays the information in log buffer.
Choose the menu
Maintenance>>Log>>Log Table to load the following page:
Figure 16-3 Log Table
The following entries are displayed on this screen:
Log Info
Index:
Displays the Index of the log Entry.
Time:
Displays the Time when the log Event occured. The log will have the correct Time
after you have confi gured the
System>>System Settings>>System Time page.
Module:
Displays the Module which the log information belongs to. You can select a
Module from the drop-down list to display the corresponding log information.
Severity:
Displays the Severity Level of the log Entry. You can select a Severity Level to
display the log information whose Severity Level value is the same or smaller.
Content:
Displays the Content of the log information.