Luxul XMS-1024P - Manual (Page 229)

229
User Guide
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
User Config
Auth Mode: Select the Authentication Mode for the User. (SNMP v3 only)
„
None: No Authentication method is used.
„
MD5: Port Authentication is performed using the HMAC-MD5 algorithm.
„
SHA: Port Authentication is performed using the SHA (Secure Hash
Algorithm). This Authentication mode uses higher security than
MD5 mode.
Auth Password: Enter the Password for Authentication.
Privacy Mode:
Select the Privacy Mode for the User. (SNMP v3 only)
„
None: No Privacy method is used.
„
DES: DES Encryption method is used.
Privacy
Password: Enter the Privacy Password.
User Table
Select:
Select the desired entry(ies) to Delete the corresponding User.
User Name: Displays the Name of the User.
User Type: Displays the User Type.
Group Name: Displays the Group Name the User belongs.
Security Model: Displays the Security Model of the User.
Security Level:
Displays the Security Level of the User.
Auth Mode: Displays the Authentication Mode of the User.
Privacy Mode: Displays the Privacy Mode of the User.
Operation: Click the Edit button to modify the Group associated to a User, then click
the Modify button to apply.
CAUTION: SNMP User Config settings will be restored to defaults if the
Switch is restarted and you have not selected Save Config from
the main menu and saved your running configuration to non-
volatile memory.
NOTE: The SNMP User and its associated Group must have the same
Security Model and Security Level.