Rocktron Prophesy II - Manual (Page 18)

1 8
Assigning Effects to a Preset
The user-assignable Pre Effect and Post Effect pages each begin with a simple page which
displays the effect currently assigned to the respective location, as shown in Figure 5-6. The unit
will display "
EMPTY
" if no effect has been assigned to the location, as shown in Figure 5-7.
122 POST EFFECT 1
EMPTY
Figure 5-7: Post Effect 1 status/assign page with no effect assigned
122 POST EFFECT 1
CHORUS
Figure 5-6: Post Effect 1 status/assign page with the Chorus effect assigned
—————————————————————————————————————————————
1 To assign an effect to a preset, first select the location where
the effect is to be executed in the signal path (Pre effect, Post
Effect 1, Post Effect 2 or Post Effect 3) using the PAGE control.
POST EFFECT 2
EMPTY
Continued
р