Rocktron Prophesy II - Manual (Page 52)

5 2
SPEAKER SIMULATOR Page
The SPEAKER SIMULATOR function is available in all presets, and provides a
realistic approximation of a miked speaker cabinet when connecting the Prophesy
directly to a mixing board, recording system or other full range system using the rear
panel RECORDING OUT jacks.
Speaker Simulator Page
122
D
ESCRIPTION
The SPEAKER TYPE parameter determines the type of speaker to be simulated.
15”,12”,10”, 8” and full range speakers are available.
The MIC POSITION parameter simulates a microphone placed anywhere from
the center of the speaker cone out to the edge of the cone. Positive parameter
values simulate moving the microphone toward the center of the speaker, while
negative values simulate moving it to the edge. (-15.0 to +15.0)
The REACTANCE parameter simulates the characteristics of the interaction
between a tube amplifier and a guitar speaker cabinet. The higher the parameter
value selected, the more these characteristics will be apparent. Negative values of
reactance can be used to simulate an open-back cabinet. (-15.0 to +15.0)
P
ARAMETER
SPKR TYPE
MIC POS
REACTANCE
Speaker Simulator page parameters
MICPOS
+8.0
SPEAKER>>
SIMULATOR>
SPKR TYPE
12 INCH
REACTANCE
+3.0