Rocktron Prophesy II - Manual (Page 85)

85
———————————————————————————————————————————————————
2 Configure the Prophesy for remote access:
Use the PAGE control to access the first MIDI page, which looks like
the page below.
———————————————————————————————————————————————————
3 Use the control labeled "MID" to enable Remote mode operation.
———————————————————————————————————————————————————
4 If the Prophesy preset titles are to be displayed by the All Access, use
the "TREBLE" control to set the TITLE parameter to "ON", enabling
title transfers from the Prophesy to the All Access.
———————————————————————————————————————————————————
5 Configure the All Access to control the Prophesy:
Set the Operating Mode to "
REMOTE ".
———————————————————————————————————————————————————
6 Set the Bank Size to " 10 ".
———————————————————————————————————————————————————
7 Reinitialize only the controller information for the instant access
switches and pedals using the All Access controller restore code
number "
231 ".
———————————————————————————————————————————————————
8 If the preset titles from the Prophesy are to be displayed on the All
Access automatically, set the Remote Title Number to match the "REM
ID" parameter value on the Prophesy.
REMOTE
OFF
TX
1
REMID
0
TITLE
OFF
MIDI RX
1
REMOTE
ON
TX
1
REMID
0
TITLE
OFF
MIDI RX
OMNI
REMOTE
ON
TX
1
REMID
0
TITLE
ON
MIDI RX
OMNI
G
Editing the All
Access
Please refer to the All Access
manual for detailed
information on editing the
All Access.