Rocktron Prophesy II - Manual (Page 51)

5 1
Reverb Page 2:
122
PREDLYL
55
HOLD
50
G-THR
- 2 6 . 0
G-DEC
17
GATE
ON
PREDLYR
100
D
ESCRIPTION
The PREDELAY LEFT parameter determines the length of time after a signal is
input to the Prophesy that the left channel signal will be input to the reverb
section. Delaying the reverb signal provides greater separation of the input and
reverb signals, and helps to increase the perceived size of the Room, Hall or
Stadium. (0 to 198)
The PREDELAY RIGHT parameter determines the length of time after a signal is
input to the Prophesy that the right channel signal will be input to the reverb
section. Delaying the reverb signal provides greater separation of the input and
reverb signals, and helps to increase the perceived size of the Room, Hall or
Stadium. (0 to 198)
The GATE parameter closes down the decay of the reverb very quickly after a
prescribed amount of time (most commonly a very short period of time). Note
that the gating on the Prophesy acts on the reverb decay, rather than the reverb
output as on many other units. (Off, On)
The GATE DECAY parameter determines how quickly the gate will close down
the reverb decay after the reverb has sounded for the specified time. (0 to 31)
The GATE THRESHOLD determines the signal level at which gating will take
place. When the signal remains below this threshold level for the specified HOLD
time, the reverb will be gated. When the input signal peak rises above this
threshold, the gate will open and reverb will be heard. (Off, -42.0 to +6.0)
The HOLD parameter determines how long the reverb signal will sound before
the gate begins to close. (0 to 99)
P
ARAMETER
N
AME
PREDLY L
PREDLY R
GATE
G-DEC
G-THR
HOLD
Reverb Page 2 parameters