Rocktron Prophesy II - Manual (Page 20)

2 0
—————————————————————————————————————————————
2 If you wish to save the new preset to a new preset number, use
the PRESET control to select the new preset number. Note that
the preset at the currently selected location will be written
over when the storing process is completed.
If you do not wish to store the new preset at a different preset
number, skip this step. Note that the original preset stored at
this location will be written over once the storing process is
complete.
—————————————————————————————————————————————
3 Once the desired preset number has been selected, press the
STORE button a second time. The Prophesy will display
"
STORING PRESET NOW " as it is storing the information,
and " PRESET HAS BEEN STORED " when it is finished.
Now the modified preset has been stored to the selected preset
number and can be recalled at any time.
—————————————————————————————————————————————
Assignable Effects Loop
In addition to assigning Prophesy effects to the locations noted as "User-assignable" in
Figure 5-5, the rear panel effects loop can also be assigned to any of these locations instead of
an internal Prophesy effect. This effectively inserts any outboard effect(s) into the Prophesy
signal path wherever you define!
****** PRESET HAS BEEN STORED *****
G
Cancelling the
store process
Turning the PAGE control
at any time prior to
pressing the STORE button
a second time (Step 3) will
cancel the storing process.