Controller pages – Rocktron Prophesy II User Manual

Page 58

Advertising
background image

5 8

CONTROLLER Pages

Controller assignments allow for specified Prophesy parameters to be mapped (or

assigned) to a MIDI controller for real-time control by an expression pedal or by the
controller on/off buttons of a MIDI foot controller. In addition to 120 MIDI control
numbers, you may assign the Prophesy's ADSR (Attack/Sustain/Decay/Release) control
effect to any parameters with these controller assignments (ADSR is discussed further in
Section 7, Using the ADSR).

Controller assignments also allow you to store an upper and lower parameter value

limit which the controller cannot exceed. For example, when using the expression pedal
to send continuous control changes to control the “

PITCH 1

” parameter, an upper

limit of +300 can be set and a lower limit of -200 can be set—even though the actual
parameter range is from +1200 to -2400. When the expression pedal is at its heel
position in this example, the “

PITCH 1

” parameter will be at -200, while at its toe

position it will be at +300. (Refer to Section 7: “Using the Prophesy” for information on
setting up controllers.)

Up to eight controllers can be assigned for each individual preset, and each one has

its own display page.

Advertising