Rocktron Utopia G100 - Manual (Page 56)

56
Storing changed preset parameters:
1,3
2
While viewing a function or parameter title, press the STORE button to start the
store procedure. The display will now alternate between the destination preset
number and title and "STORE AT PRESET" Step 1
29 PRESET TITLE STORE AT PRESET
Step 3
NOTE: If a preset with altered parameters is exited before completing
Step 3, all edited parameter values will be lost. When saving
altered parameters, make sure the display flashed "STORED"
before exiting the store procedure.
57 PRESET TITLE STORE AT PRESET
Turn the PRESET knob to select the desired preset number to store the new
parameter values into. (If you wish to store the new parameter values into the
current preset number, this step is not necessary.) The display will now alter-
nate between the new preset number and "STORE AT PRESET". Step 2
Press the STORE button a second time to store the new values into the selected
preset number. The display will briefly flash "STORED" before displaying the
new preset number and title. (Turning the PARAMETER ADJUST knob before
completing this step will cancel the store procedure.)
STORED