Rocktron Utopia G100 - Manual (Page 25)

25
WAH-WAH Function
The WAH-WAH function is available only in configurations which display "WAH" in the configu-
ration title.
The UTOPIA G100 has an internal wah-wah which allows for the built-in expression pedal to be
used as a wah-wah pedal when selected in the Pedal Controllers function. To do this, you will
need to activate this in the "PEDAL CONTROLLERs" function and assign the wah frequency
sweep parameters (See "PEDAL CONTROLLERS" for more information)
The PARAMETER SELECT knob will allow you to access these WAH-WAH parameters:
The WAH-WAH parameter determines whether the wah-wah is active for the
current preset.
The DIR/EFF MIX parameter is used to define the ratio of direct signal level
to WAH-WAH signal level.
The WAH FREQUENCY parameter allows you to manually sweep the
frequency range of the wah-wah via the PARAMETER ADJUST control.
Selecting a frequency for this parameter and storing the WAH-WAH param-
eter IN allows you to use the wah-wah as a fixed wah.
WAH-WAH
MIX DIR/EFF
WAH FREQ