Rocktron Utopia G100 - Manual (Page 58)

58
Editing a preset title:
3 5 2,4 1
To begin the Title Edit function, turn the FUNCTION SELECT knob clockwise
until the UTOPIA G100 displays "TITLE EDIT". Step 1
Turn the PARAMETER SELECT knob clockwise to initiate the Title Edit mode.
Turning this knob will also select the character location to be edited. The letter to
be adjusted will have a flashing box over the character selected.
** TITLE EDIT **
Step 2
57 PRESET TITLE
(Flashing box)
Use the PARAMETER ADJUST knob to select the desired character for the
current position (flashing box). Step 3
57 MRESET TITLE
To edit the character in the next position, turn the PARAMETER SELECT knob
one step clockwise. The flashing box will move to the next character. Step 4
NOTE: The STORE button must be pressed to save the new title. Exiting
the Title Edit function before pressing the STORE button will erase any
editing that was done in Title Edit. Also, after flashing "STORED", the
UTOPIA G100 will exit the title edit mode and return to the main preset
number.
After all the characters have been edited as needed, press the STORE button to save the
new title memory. The UTOPIA G100 will flash "STORED" briefly. Step 5
STORED
57 MRESET TITLE