Rocktron Utopia G100 - Manual (Page 10)

10
10 UP button
This button allows you to scroll UP through the available presets. Press the button once to
move one preset UP, or press and hold down the button to auto-scroll UP. Note that once
you have reached your desired preset, the preset name on the screen will be flashing but
NOT recalled. The original preset will still be active. To recall or activate the desired
preset you will need to press the "RECALL" button.
11 INPUT jack
This standard, mono 1/4" jack is used to provide input to the unit.
12 OUTPUT RIGHT jack
This 1/4" jack provides the right output of the UTOPIA G100 for use in stereo situations,
such as direct recording, plugging into a PA system, two guitar amplifiers, etc.
13 OUTPUT LEFT/MONO jack
This 1/4" jack provides the left output of the UTOPIA G100. This output is a MONO output
and should be used in mono situations, such as plugging into the front of an amplifier. For
stereo situations you must also use the OUTPUT RIGHT Jack.
14 AUX INPUT Jack
This 1/8" stereo jack provides an Auxiliary input allowing you to plug a MP3 Player, CD
Player, etc. so that you can jam along with your favorite tunes.
15 PHONES jack
This 1/8" stereo jack provides a stereo output allowing you to practice in private. Note that
you need to activate the "STEREO" parameter in the GLOBAL Function in order to have a
stereo sound. Additionally, it is recommended that you set the Speaker Simulator in the
GLOBAL Function to "LOCK BOTH" as well. Note, this setting will be used until you turn
OFF the UTOPIA G100. The SPEAKER SIMULATOR setting used in each preset may be
modified per preset while in this mode. See page 18 for more information on the GLOBAL
Function.
16 POWER jack
This 4-pin DIN connector accepts power from the 9VAC/2A adaptor supplied with the unit.
17 POWER Switch
Use this switch to turn the UTOPIA G100 On and Off.
3. UTOPIA G100 Top and Back Panels....continued.....