Rocktron Utopia G100 - Manual (Page 9)

9
1 PRESET SELECT control
Turning this knob scrolls through the successive presets. The presets are automatically
recalled.
2 DISPLAY panel
The DISPLAY shows the preset names, functions and parameters that are selected.
3 PARAMETER ADJUST control
This knob is used to adjust a displayed parameter value.
5 STORE button and STORE LED
This button is used to store values into the G100's memory when altered. See "Storing
Changed Preset Parameters" for more information on this procedure.
4 PARAMETER SELECT control
When adjusting parameter values, turning this knob will scroll through the available param-
eters under the current function heading. In the "Title Edit" function, this knob will scroll
through the character locations to be edited.
6 FUNCTION SELECT control
This knob allows access to each function of the UTOPIA G100 depending on which con-
figuration is currently recalled.
7 EXPRESSION PEDAL
The built-in expression pedal will change parameter(s) that have been assigned to the
pedal in the Pedal Controllers function. Use the pedal to increase or decrease volume
levels, or for a pitch shifting whammy effect, or to bring in reverbs and delays. There are
many uses for this pedal. Please see the Pedal Controllers section of this manual for
information how to program the expression pedal for many cool effects.
8 DOWN button
This button allows you to scroll DOWN through the available presets. Press the button
once to move one preset down, or press and hold down the button to auto-scroll DOWN.
Note that once you have reached your desired preset, the preset name on the screen will
be flashing but NOT recalled. The original preset will still be active. To recall or activate the
desired preset you will need to press the "RECALL" button.
9 RECALL/MUTE button
This button allows you RECALL or activate the preset you have scrolled to using the
DOWN or UP button. Pressing and holding down this button for two seconds will MUTE the
output of the UTOPIA G100. To disengage the MUTE function, press the RECALL/MUTE
button again.
3. UTOPIA G100 Top and Back Panels....continued.....