Rocktron Utopia G100 User Manual
Page 57
![background image](/manuals/741247/57/background.png)
57
Selecting a configuration
:
5
2
1
3
4,6
Step 1
To select a new configuration, turn the FUNCTION SELECT knob clockwise until
the UTOPIA G100 displays "CONFIG SELECT".
CONFIG SELECT
When a new configuration is stored into a preset, each of the parameters contained in the
new configuration that were contained in the previous configuration will retain the same values.
All new configuration parameters that were not contained in the old configuration will be set to
their default value (or their lowest value).
Turn the PARAMETER SELECT knob clockwise to display the current configura-
tion.
Step 2
PRE,CHR,DL,REV
Turn the PRESET knob to select the preset you wish to store the new configura-
tion into. (If you want to store the selected configuration into the current preset,
skip this step.)
Step 5
Step 3
Use the PARAMETER ADJUST control to select the desired configuration.
WA,PRE,DL,REV
Note: The new configuration will not take effect until it is stored.
Press the STORE button to initiate the store procedure. The UTOPIA G100
display will alternate between the current preset number/title and "STORE AT
PRESET".
29 PRESET TITLE
STORE AT PRESET
Step 4
62 PRESET TITLE
STORE AT PRESET
Press the STORE button a second time to store the selected configuration into
the selected preset. The UTOPIA G100 will display "STORED" briefly.
Step 6
STORED